www.hpr-tuning.com

The Superior solution for installing an 8HP transmission into your Skyline GTR.

This discounted full package deal is the one we recomend to most of our customers. It includes the Skyline GTR chassis kit, a fixed HPR 8HP prepped tranmission, and all accessories for a plug and play swap - saving time and money.

For customers looking for a solid starting point, we offer the Skyline GTR chassis kit bundled with an HPR-prepped 8HP transmission of your choice. View kit →

Prefer to tailor your build? Use our online configurator to create a fully customized kit, selecting exactly what you need and skipping what you don’t. Build your custom kit →

Superior 8HP to Skyline GTR full package deal:

Upgrade your Skyline GTR with our discounted full package deal which suites 95% of our customers. A complete GTR chassis kit, paired with an HPR-prepped 8HP transmission of your choice and all essential accessories for a plug and play swap.

With precision machining and essential external components—like the billet bellhousing—pre-installed, installation is straightforward: simply bolt on your transfer case and install the transmission as a single unit.

At the heart of the kit is HPR’s billet bellhousing and flexplate—the crown jewel of the Superior Kit—ingeniously merging the 8HP centerplate into a singular unit.
Developed in-house at HPR, utilizing cutting-edge metrology-grade 3D scanners and Geomagic Design X software, the Superior Kit sets a new standard in transmission upgrades. The components ensure a premium feel and an unmatched driving experience for Skyline GTR enthusiasts.

Advantages of the Superior Kit for your Skyline GTR:

• No chassis modifications required for all Skyline GTR models.
• No cutting needed in the bellhousing to fit starter or front propshaft.
• Matches the built length of the 6-speed Getrag found in the R34 GTR.
• No custom front propshaft necessary (spacer kit supplied for R32/33 users; R34 direct fit).
• Includes a billet steel flexplate for added durability.
• 100% bolt in with stock propshafts for R34GTR
  
  

What is included in this kit?

• Prepped HPR 8HP transmission (CAT 0 | 1000hp/1000nm) with the billet bellohusing pre-installed.
• Billet 4340 Flexplate for your Skyline GTR (with ARP Hardware)
• Stock converter modified to suite your GTR
• HPR Breather mod-kit
• Nissan RB dust shield
• 3 piece billet crossmember kit with 60A rubber mounts
• Rear adapter kit for Skyline GTR
• Billet 7075 aluminum oil pump cover for the GTR transfer
• Shifter selector blockout
• Shifter cover for transfer
  
• Front propshaft spacer kit for your chassis (R32, R33, R34)
• All installation hardware included in the kit
• Printed installation instructions.
  
  

Accessories included in this full package:

• HPR 8HP Thermostat  oil pan
• Setrab 8HP 625 Oil coler kit
• DCT Shifter (Short/natural)
• HPR Nissan S/R chassis shifter plate with wiring grommet
• CANFormance transmission control unit
• CANTCU 8HP plug and play wiring harness
• CAN Keypad (6 keys 3x2)
  
  

Items not included in the kit

• Rear propshaft modification (R32/R33 users must shorten stock shaft or replace with a new one-piece propshaft which can be purchased separatley)

• Transmission oil

• Upgraded torque converter (stock unit included)
  
  

NOTE:

• Transmissions are sourced from BMW vehicles with the N57 engine. Each unit is thoroughly inspected and backed by a 90-day warranty.

• R34 GTR transfer case is not compatible with this kit.

• R32/R33 GTR front propshaft requires the included spacer kit for proper fitment.

• R34 users can retain the stock propshaft (rear propshaft must still be shortened for R32/R33, or a new one-piece can be purchased).

• Check out you ECU compability with the CANTCU here: https://wiki.canformance.net/CANTCU/integrations/supportedECUs

Note on Transfer Case Oil Pump Gear Size:
Our oil pump covers are supplied to suit the standard 5.5 mm thickness gear. Some early 1989–1990 GTR models were fitted with a 7 mm oil pump drive. If you own an early model, we recommend checking the thickness of your gear before placing an order.

If you confirm your gear size with us before your order ships, we can supply the correct cover at no extra cost. If you’ve already purchased a kit with a 5.5 mm cover but require the 7 mm version, we can provide it separately at cost price.

"This product is a custom order with our supplier and cannot be refunded."

Please contact us at info@hpr-tuning.com for more info and availability as lead time can be up to 16 weeks.